1. Unboxing

Unpacking the FX Device:

• Carefully remove the FX Device from its packaging. Handle it by the case to avoid electrostatic discharge to the pins of the gold SMA RF connectors.
• Inspect the device for any visible signs of damage before proceeding.
• If there is any damage or anything is missing contact your supplier.
  ‍

Internal Kit:

1. PilotAware FX EC System
2. 869.5 MHz and 1090 MHz  Di-Pole antennas
3. GPS Remote Antenna
4. USB Type-C Cable
5. RJ12 FLARM Power and Data cable.
6. DC Molex-SL Power Cable.

‍

‍

Unpack and Identify: Locate the two internal dipole antennas connected with gold coaxial cables.
‍

Antenna Details:‍

• The shorter antenna (105mm) is tuned to 1090MHz for ADS-B signal reception.
• The longer antenna (135mm) is tuned to 869.5MHz for PilotAware transmissions.
  ‍

Important: These antennas are not interchangeable and must be connected to the correct SMA connectors on the FX device, as outlined in the installation instructions.
‍

GPS Antenna: The FX unit has a built-in GPS antenna, so using the remote internal GPS antenna is optional. The remote GPS antenna is helpful if you choose to install the FX device behind the dashboard or in a concealed position. In this case, you can position the remote GPS antenna in a spot with a clear view of the sky, such as on the dashboard cowling, to ensure optimal satellite reception.

External Kit:

1. PilotAware FX EC System
2. 2M RG142 Coaxial Cables
3. GPS Remote Antenna
4. USB Type-C Cable
5. RJ12 FLARM Power and Data Cable
6. DC Molex-SL Power Cable
7. External Aviation Grade Antennas

‍

‍

Unpack and Identify: Locate the two external aviation antennas, coaxial cables, and mounting components in the kit.
‍

Antenna Details:

‍

• ‍‍Shorter Antenna (55mm): Tuned to 1090MHz for ADS-B signal reception.
• Longer Antenna (75mm): Tuned to 869.5MHz for PilotAware transmissions.
  ‍

Important: These antennas are not interchangeable and must be connected to the correct SMA connectors on the FX device, as outlined in the installation instructions.
‍

GPS Antenna: The FX unit has a built-in GPS antenna, so using the remote internal GPS antenna is optional. The remote GPS antenna is helpful if you choose to install the FX device behind the dashboard or in a concealed position. In this case, you can position the remote GPS antenna in a spot with a clear view of the sky, such as on the dashboard cowling, to ensure optimal satellite reception.‍

Power and Connection Cables ‍

Gather the remaining cables and lay them out separately ensuring that you have the following:

• RJ12 cable to be used to connect to an existing FLARM unit and FLARM display.
• One Molex-SL fused power cable, solely for 12-30V power.
• One USB-C cable, solely for power.

Examine each cable for any signs of wear or damage to ensure optimal performance upon installation. If there are any issues contact us at support@pilotaware.com