If the FX receives a faulty update, or there is a need to restore the software to factory settings. You can do so by following these instructions.
1. Locate the Reset Button
- Using a pin or a similar tool, gently insert it into the reset hole on the device (as shown in the images above).
- Press down until you feel a tactile click, which indicates the reset button has been engaged.
2. Power On While Holding the Reset Button
- While holding the reset button, connect the FX device to its power source.
- Continue holding the button for 15 seconds.
3. Wait for Red LEDs to Flash
- Watch the LED indicators on the device. When the red LEDs begin to flash, it indicates the reset process has begun.
4. Restart and Update
- After the reset is complete, the FX device will restart automatically.
- The device will revert to its factory-installed software. Check if any updates are available and install them to ensure the device is running the latest software version.
Important Notes:
• Use a Proper Tool: Ensure the tool you use to press the reset button doesn’t damage the internal components.
• Update Required: After resetting, always verify that your FX device is running the latest software version to ensure optimal functionality.
• Data Loss: A factory reset will erase all custom configurations. Make sure you’ve noted any important settings before proceeding.
