ForeFlight

Step-by-Step

The connection of to ForeFlight to PilotAware is automatic. If the previous step has been performed correctly, then locally received traffic should appear directly on the ForeFlight display. To ensure that the setup is correct, please see the following steps.

1. Launch Foreflight:
   ‍
   • Open the Foreflight App on your device.
     ‍
2. Confirm Connection:
   ‍
   • On Foreflight, go to the Settings
     ‍
   • Scroll down to the bottom of the page and ensure FLARM is Connected
     ‍
3. Configure FLARM Pin:
   ‍
   • The App will prompt you to enter FLARM pin. This is 6000.
     ‍
4. Enable Traffic Layers:
   ‍
   • Tap the layers button and enable Traffic.

Tips: The FLARM pin request appeared after restarting the app. Make sure Traffic is enabled from the layers list